Products and Services

Barudan BEAT 100

Posted on

  Barudan BEAT 100 User Manual 102, 104, 106 Instructions (C) 2009-2018 PLR Electronics   Basics Operation Keys CTL + R: To erase all input letters/numbers CTL + P: To backup one step CTL + G: Go to the beginning menu, STYLE CTL + O: Move pantograph to origin ENT: Enter key. To accept. SPACE: […]

Products and Services

Barudan BEAT

Posted on

  Barudan BEAT User Manual BEAT-4, BEAT 700, BEAT 800 Instructions (C) 2009-2018 PLR Electronics   Basics   Operation Keys ON/OFF: To power the control power. The main breaker must be turned on first. MODE: To scroll through the main menu TEACH’G: To program color change sequence TS: For non-thread trim machines only. Will stop […]

Products and Services

Barudan BESR

Posted on

  Barudan BESR User Manual Instructions (C) 2009-2018 PLR Electronics   Basics   Control Panel Keys PRODUCT: Shows stitch counter. Is reset by pressing + and – simultaneously. FUNC: Edits function codes of a design in memory. + AND – KEYS: To increment or decrement parameters. TEACH’G: To program the color change sequence. TS: Activates […]

Products and Services

Barudan BEMR

Posted on

  Barudan BEMR User Manual Instructions (C) 2009-2018 PLR Electronics   Basics   Control Panel Keys NUMBER PAD: To enter number selections. MENU KEYS: Underneath the monitor, labeled A through G. The A key is only for advancing through the current menu, and the G key is for changing menus. The other keys select the […]

Products and Services

Barudan BEMS

Posted on

  Barudan BEMS User Manual Instructions (C) 2009-2018 PLR Electronics Basics   Control Panel Buttons POWER ON-OFF: Turn on machine; only works if underneath relay is on NUMBER PAD: Enter number selections LCD BUTTONS: To choose from among the LCD menu; each button is underneath the menu option. # KEY: To change the current design […]

Products and Services

Tajima TMM

Posted on

  Tajima TMM User Manual Instructions (C) 2009-2018 PLR Electronics   Basics   Here are some kinds of the Tajima TMM machine: TMM-H: Flat frame, main motor underneath the control panel. Underneath bar switch. TMM-HC: Cap frame, main motor behind the machine. ON/OFF buttons instead of bar switch.   Keyboard commands SHIFT CTRL RESET : […]

Products and Services

Tajima TMEF

Posted on
TMEF Control Panel

  Tajima TME, TMEF User Manual Instructions (C) 2009-2018 PLR Electronics Basics   Main buttons (on the bottom left) DISPLAY: Change the information shown on the main screen. (N.SELECT, TAPE CODE, REPEAT, STITCH, ERROR) ORIGIN: Return to the start position. Press ORIGIN, then SET. Make sure home position is programmed. SELECT: To change the color […]

Products and Services

Tajima TME-HC

Posted on

  Tajima TME-HC, TMEF-HC User Manual Instructions (C) 2009-2018 PLR Electronics   Basics   There are four kinds of the Tajima TME-HC machine: TME-H: Flat frame, main motor underneath the control panel. Underneath bar switch. TME-HC: Cap frame, main motor behind the machine. ON/OFF buttons instead of bar switch. TMEF-H: Flat frame, main motor to […]

Products and Services

Tajima TME-DC

Posted on

  Tajima TME-DC, TMFD-DC User Manual Instructions (C) 2009-2018 PLR Electronics   Basics There are four kinds of the Tajima TME-DC machine: TME-D: Flat frame, main motor underneath the control panel. Underneath bar switch. TME-DC: Cap frame, main motor behind the machine. ON/OFF buttons instead of bar switch. TMEF-D: Flat frame, main motor to the […]

Products and Services

Tajima TMFX

Posted on

  Tajima TMFX User Manual Instructions (C) 2009-2018 PLR Electronics   Basics   Control Panel Keys MENU KEY A: Memory and read operations MENU KEY B: Color change programming, scaling, rotation MENU KEY C: Maximum RPM and stitch counter MENU KEY D: Manual operations, ATH SET KEY: To select, reset errors, install FRAME TRAVEL KEY: […]